Product Description

ELS*0R Remote and hand control Firing System To make sure that you can use the product safely, please read the introduction seriously and keep it. A. product introduction: ELS firing systems uses **0 V alternate current, with “control time” function, it include rapid fire and step by step fire. B. usage elucidation: 1. Connecting **0V electricity then place the switch on the “test” position, turn on the power. 2. It can use rapid test or step by step test: a. Step by step test: Put the products into red/black connection, then place the switch on the “step by step”. Push the , if the indicator shows bright that means connect well. b. Rapid test: Place the switch on the “rapid fire”. Push the , if the indicator shows bright that means connect well. 3. After the test, then choose the fire method(step by step or rapid fire), if using the rapid fire, you should control the time first. 4. If you push “reposition” , all of the light will turn off(except the **0V power light), then place the switch on “fire” position: a. Step by step fire: Place the switch on the “step by step” position, then push the one by one to fire the products one by one. b. Rapid fire: Place the switch on the “rapid fire” position, push the , it will fire all of the products according to the setting time. C. Attention: 1. Please turn off the power switch when the circuit connecting but no need use it, and notice to do not shake machine violently; 2. Don’t press “FIRE” after pull out electrical outlet, for there is left power would ignite products; 3. Please don’t place the product in the damp, sour , alkali and pollution environment.